Your truck already has a gooseneck hitch, but your 5th wheel trailer still uses a king pin. This conversion replaces the pin box with an air cushioned gooseneck coupler, so you can tow with the setup you already have without giving up ride quality.
The core of this Shocker Hitch coupler is the air bag. It changes the way your trailer moves. It takes the edge off when you hit the throttle, stop suddenly, or run into rough patches in the road. Instead of that shock and bounce transferring straight to the truck, it gets absorbed right at the hitch. Your trailer stays steady, and your truck doesn't feel like it's getting beat up every time the road gets rough.
With some couplers, you're never quite sure if they're secure. This Demco eZ-Latch coupler fixes that. Just drop it onto the ball and it latches itself. There are no extra steps involved, and you won't have to hang over the side of your truck straining to get a pin in. Once it's connected, you know it's going to stay put. And if you're leaving your trailer hooked up somewhere, the InfiniteRule lock (IR66FR - sold separately) keeps the latch from being opened so no one can pull up and take it.
Every trip puts a different load on your trailer. Water tanks, gear, and cargo all change how it rides. The built in air valve lets you adjust pressure in the air bag so the connection stays controlled. Add air when the trailer is fully loaded, then back it off when you are running lighter.
This kit replaces your factory 5th wheel pin box and mounts using the same bolt pattern, so theres no need to modify the trailer frame. Once installed, the connection shifts to a gooseneck ball in the bed, clearing out the space a traditional 5th wheel hitch takes up. Add the safety chain kit (SHK35MR - sold separately) to complete the gooseneck setup
Towing capacity is limited by the lowest rated component in your setup.
If you have a recessed gooseneck ball, there must be at least a 12" x 12" opening in your bed for this coupler to work. In addition, the top of the hitch ball cannot be more than 2" from the top of the bed.
Safety chains are needed to attach the mandatory safety chains for your rig. Use SHK35MR (sold separately) for best results.
Ratings & Reviews
Fast delivery thanks
we are always very happy with the customer service and will continue using e trailer for all of our rv related needs
Great product
This hitch is amazing
easy install smooth ride
Easy install. Nice product.
Item is as described by seller
If you have all the right tools, and an assistant, this is a simple 1 hour job. I pulled my truck back, supported the pinbox using an 8x8" block and easily pushed it into place using the block as a pivot point. I dont know what the sweet spot for PSI will be but towing (came preloaded at 20 PSI) but seems smoother and I gained about 3-5" space beteen my truck and trailer after installation. If you get the safety chain package, the shaft on the pinbox bolts will be too short...I grabbed Class 5 bolts at a local Tractor Supply. A noticable umprovement occured when I loaded my duelly, the bed didnt sink like it used with the 5th wheel and the trailer seemed to find its natural level quickly.
Excellent customer service, definitely recommend to everyone I know. Thank you Jaime. Went above and beyond
Hauled great, working on the amount of air in the system for the best ride.
Had i known how hard it would be to install it i would not have bought it.
I have the hitch installed, it's a perfect fit TY E-trailer for all your help couldn't have completed this project without your help. You and your team are the best !!!!
Bought this product in midst received it on Wednesday it recommended some grease and a second person, fortunately I didn’t need any of those I just put a starter bolt when installed the king pin as followed per the directions. Very simple install I had the torqued to spec in 30 mins with removal. Basically I installed it the the same bolt holes I removed the old one and adjust how I needed to on the gooseneck lock down nut. First holding a stock lift 25 ram 3500 first hole it sat pretty level I am on a bit of a decline when test I tried the 3rd hole it was too high the middle I went with the second hole to see how the load carry’s tomorrow I went with 30 psi on the absorber I’ll follow back with ride details in a few days
Great product and fast delivery
The item arrived promptly and as expect ed.
Really smooths out the pull on my 14K Cedar Creek 5th wheel. I have used gooseneck conversions since 1996 and this is the best. the Demco latch is the way to go. Carter got it shipped out to me on Sunday and UPS delivered it on Wednesday. Outstanding!
This was a tremendous hitch. I have a standard bed, and I can do a 90 degree turn without hitting the cab or side rails.
Install was simple and we've put over 2500 miles on it so far a considerable amount of which was in very windy conditions and it handled beautifully!!
Will recommend to anybody considering a goose ball!
Do you have a question about this 5th Wheel Gooseneck Adapter?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.